Specification
| Property | Value |
|---|---|
| Alloy Type | 5052 |
| Temper | H32 |
| Thickness | Varies (0.4-50mm) |
| Width | Varies (typically up to 48″ or 1219.2 mm) |
| Length | Varies (typically up to 144″ or 3657.6 mm) |
| Density | 2.68 g/cm³ |
| Tensile Strength | 31,000 – 38,000 psi |
| Yield Strength | 21,000 psi min |
| Elongation at Break | 12 – 20% |
| Modulus of Elasticity | 10.0 x 10^6 psi |
| Thermal Conductivity | 138 W/m·K |
| Electrical Conductivity | 30% IACS |
| Melting Point | 607°C (1,125°F) |
| Hardness (Brinell) | 47 |
| Machinability | Fair to Good |
| Weldability | Excellent (with proper precautions) |
| Corrosion Resistance | Excellent (particularly in marine environments) |
| Formability | Very Good |
| Finish | Mill finish, brushed, anodized, or painted |
Detalis of 5052 H32 Aluminum Sheet
| Element | Percentage Composition |
|---|---|
| Silicon (Si) | 0.25% max |
| Iron (Fe) | 0.40% max |
| Copper (Cu) | 0.10% max |
| Manganese (Mn) | 0.10% max |
| Magnesium (Mg) | 2.2% – 2.8% |
| Chromium (Cr) | 0.15% – 0.35% |
| Zinc (Zn) | 0.10% max |
| Titanium (Ti) | 0.10% max |
| Other Elements | 0.05% each, 0.15% total max |
| Aluminum (Al) | Remaining balance |
5052 aluminum plate is an AL-Mg series alloy aluminum plate, and magnesium is the main alloying element in 5052 alloy aluminum plate. It is the most widely used type of rust resistant aluminum. This alloy has high strength, especially fatigue resistance, high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. It has good plasticity during semi cold work hardening, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished.
Aluminum magnesium alloy also contains small amounts of manganese, chromium, beryllium, titanium, etc. Except for a small amount of solid solution, most of the manganese in the alloy forms MnAl6. The effect of chromium in 5052 aluminum plate is similar to that of manganese, improving its resistance to stress corrosion cracking, enhancing the strength of the base metal and weld seam, and reducing the tendency for welding cracks, but its content generally does not exceed 0.35%.
5052-H32 aluminum sheet is a versatile alloy with several notable features, uses, and benefits, making it a popular choice in various industries:
Features:
- Corrosion Resistance: 5052-H32 aluminum sheet is renowned for its outstanding corrosion resistance, particularly in marine environments. It forms a protective oxide layer on the surface, preventing further corrosion.
- Strength: While not as strong as some other aluminum alloys, it offers moderate strength, making it suitable for applications that require structural integrity without excessive weight.
- Formability: This alloy is highly formable, allowing it to be easily bent, shaped, and formed into various configurations, making it ideal for applications that require intricate designs.
- Weldability: 5052-H32 has excellent weldability, making it easy to join using various welding techniques, including MIG and TIG welding.
- Machinability: While not as machinable as some other alloys, it offers fair to good machinability, allowing for precision machining when needed.
Uses:
- Marine Applications: Due to its exceptional corrosion resistance, 5052-H32 is widely used in the marine industry for boat hulls, decks, and other components exposed to saltwater.
- Architectural Applications: It is employed in architectural applications such as roofing, siding, and decorative elements, where both aesthetics and durability are essential.
- Transportation: This alloy is used in the automotive and aerospace industries for various structural components, including vehicle panels, aircraft parts, and trailer bodies.
- General Sheet Metal Work: It is suitable for general sheet metal applications, including vehicle body panels, appliances, and building materials.
- Food and Chemical Processing: 5052-H32 aluminum is used in food processing equipment and chemical containers due to its corrosion resistance and non-reactive properties.
- Signage: The alloy is commonly used in sign making due to its ease of fabrication, corrosion resistance, and suitability for outdoor signage.
Benefits:
- Corrosion Resistance: Its exceptional corrosion resistance extends the lifespan of components in marine and corrosive environments, reducing maintenance costs.
- Formability: High formability allows for complex and intricate designs, making it suitable for various aesthetic and functional applications.
- Weldability: Excellent weldability simplifies assembly and fabrication processes, reducing labor and time costs.
- Lightweight: Aluminum is inherently lightweight, making it suitable for applications where weight is a concern, such as transportation and aerospace.
- Recyclability: Aluminum is fully recyclable, contributing to sustainability and reducing environmental impact.
- Cost-Effective: 5052-H32 aluminum offers a cost-effective solution for applications that require corrosion resistance and formability without the expense of high-strength alloys.
In summary, 5052-H32 aluminum sheet is favored for its corrosion resistance, formability, and versatility, making it a valuable material in industries ranging from marine and architecture to transportation and general sheet metal work. Its benefits include longevity, ease of fabrication, and cost-effectiveness.
How Much Does 5052 H32 Aluminum Plate Cost Per Kilogram
The price of Xienuo’s 5052 aluminum plates is about US$2.4-3.6 per kilogram. The simple calculation method is the price of one kilogram of aluminum ingots plus the processing cost per kilogram. The price of aluminum plates is affected by the price fluctuation of aluminum ingots and processing costs, and will also follow changes in market conditions.
How to Choose 5052 H32 Aluminum Plate for Your Project
Choosing the right 5052-H32 aluminum plate for your project involves considering several factors to ensure it meets your specific requirements. Here’s a step-by-step guide on how to make an informed selection:
1. Define Project Requirements:
- Clearly outline the purpose and function of the 5052-H32 aluminum plate in your project.
- Consider factors such as size, thickness, and specific properties needed (e.g., corrosion resistance, strength, formability).
2. Identify Alloy and Temper:
- Confirm that 5052-H32 is the suitable alloy and temper for your application, considering its corrosion resistance and moderate strength.
3. Select Thickness and Dimensions:
- Measure or calculate the required thickness and dimensions of the aluminum plate based on your project’s design and structural requirements.
4. Consider Surface Finish:
- Decide if you require a specific surface finish, such as mill finish, brushed, anodized, or painted, based on your project’s aesthetic and functional needs.
5. Check Alloy Purity:
- Ensure that the aluminum plate is indeed 5052 alloy and that it meets any specific alloy purity requirements for your project.
6. Assess Corrosion Resistance:
- Evaluate the environmental conditions the aluminum plate will face, such as exposure to moisture, chemicals, or saltwater, to ensure 5052-H32’s corrosion resistance aligns with your needs.
7. Review Supplier Options:
- Research reputable aluminum suppliers and manufacturers.
- Compare prices, lead times, and available services, such as cutting or custom fabrication.
- Ensure that the supplier can meet your specific size and quantity requirements.
8. Budget Considerations:
- Assess your project budget and evaluate the cost of the chosen 5052-H32 aluminum plate. Consider any additional processing costs if required.
9. Regulatory Compliance:
- Ensure that the selected aluminum plate meets any regulatory or industry standards relevant to your project, especially if it’s for specialized applications.
10. Seek Expert Advice:
- If you are uncertain about material selection, consult with engineers, metallurgists, or specialists who have experience with aluminum alloys and can provide guidance tailored to your project.
By following these steps and carefully considering your project’s requirements, you can select the most suitable 5052-H32 aluminum plate that meets your needs, ensuring a successful and durable outcome for your project.